A Stand Alone Coating -Primer
and Finish
It produces a coating with characteristics similar to metal.
Rusted surfaces do not require sand blasting
A aluminum-reinforced urethane film is produced
Galvanic Protection- As easy as Painting
Easy application means no shutdowns and cost savings.
What is Cathodic Protection and why is it important ?
Benefits -Safe and easy to apply.
Spray applied ease of application and no sand blasting needed gives great cost savings.
Check out those Technical Specifications on Rust Coatings
Technical Specifications on DTC Rust Coatings
Engineering Specifications
MSDS Quick Review, Typical Characteristics, Suitable Substrates and Uses
MSDS Quick Review
- Flammable Liquid
- DOT # Un-1263
- Lead and Chromate Free
- Operator/Applicator Safety Precautions
- Applicator of these products must wear, at all times a bureau of mines approved two stage (charcoal cotton) paint spray respirator designed for removal of organic solvent vapors.
- Fresh air supplied types of respirator is required if products TLV will be exceeded.
- Protective clothing and eyewear goggles are recommended.
Typical Characteristics |
|
| Vehicle type Pigment type Finish Color Solids by volume Weight per gallon Recommended film thickness Coverage Viscosity Dry Time Cures by Application by Gloss |
Aromatic polyurethane Aluminum Silver 50% 10.8 lbs. Wet 4 to 8 mils (per coat) Dry 2 to 4 mils (per coat) 401 sq.ft./gal@2mils 65 to 75 seconds #4 Ford to touch 45 minutesto re-coat; After 45 minutes & before 4 hours----to dry hard 8 hours Moisture cure 3500-psi paint sprayer Low angular sheen |
|
|
OEM Equipment
Petrochemical Industry |
Manufacturing replacing zinc rich primers. Bridges, Re-galvanize onsite guardrails, Traffic poles, and Signaling metal structures |