Benefits

-Safe and easy to apply

-The Coating can be renewed time after time

 

Our Product is safe and easy to use

It is a one-pack zinc coating system that can be brushed, sprayed or immersed. It is also available in spray cans.

The Coating can be applied on site

Metal structures do not have to be dismantled before treatment. (this is usually necessary with hot-dip galvanizing)

Cathodic Protection in various applications:

The Coating can be applied in moist conditions and on a damp surface.

The Coating is excellant to touch up damage from welding, cuts, drilling, riveting etc.

Structures that would be distorted by hot-dipping can now benefit from cathodic protection

Existing hot-dipped or (cold) coated structures (e.g. motorway barriers, conveyor belts, power pylons, and sheet iron work) can benefit from long term protection thanks to this technique.

Existing large structures, such as electrical pylons, tubes, pipes, tanks, silos, comices, bodywork, gates, heating installations, containers, metal frame works, masts etc., which could not be galvanized, can now benefit from cathodic protection by application on site.

The Coating can be renewed time after time

Each new film of our coating blends perfectly with the previous one. This allows the application of additional layers. Touching up can also be done at any time at minimal cost. Once a film of our coating has been applied, it does not need to be removed when it comes to recoating.

You can use the product to recoat existing hot-dip galvanizing in order to renew the cathodic protection.

It is not always necessary to grit-blast surfaces. It can be applied on mildly rusty surfaces after they have been degreased and loose rust has been removed.

Existing coatings can be painted with a new coating (and it is just as effective as the original coating). The two coatings form a single layer.

It is an excellant primer when a top coat is required (Re duplex systems in which the life of the coating is doubled according to several recognized institutions).

It forms an impenetrable barrier with good resistance to mechanical abrasion.

Adhesion tests have demonstrated that the coating has excellent adhesion on steel. Even where it has been damaged by abrasion, The Coating does not peel off.

The total integration of different coatings

	A thin film of gold dust was applied on the first coating.
	Seven days later a second coating was applied on top of the gold dust.
	The gold film remains intact between the coatings of ordinary zinc rich paint. The gold film is clearly visible, demonstrating that the two coatings remain as separate layers.